# Is USRYIELD sufficient for getting all neutron properties?

**URL:** <https://fluka-forum.web.cern.ch/t/is-usryield-sufficient-for-getting-all-neutron-properties/1202>\
**Category:** Scoring\
**Created:** [4 January 2021 10:26 UTC](https://fluka-forum.web.cern.ch/t/is-usryield-sufficient-for-getting-all-neutron-properties/1202 "2021-01-04T10:26:24Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![thanapong](https://fluka-forum.web.cern.ch/letter_avatar_proxy/v4/letter/t/c89c15/32.png) [@thanapong](https://fluka-forum.web.cern.ch/u/thanapong)\
**Post date:** [15 January 2021 10:14 UTC](https://fluka-forum.web.cern.ch/t/is-usryield-sufficient-for-getting-all-neutron-properties/1202/6 "2021-01-15T10:14:41Z")

</div>

Dear @fogallar  
I appreciate your help. I have tried mgdraw.f for scoring neutrons properties as you told and the output comes out fine but I’m not sure about how I was modified the mgdraw.f routine and I just realized that the coordinates of position are around the target-cladding which is not my final expected position.  
According to my picture shown below, the expected position of neutrons to be score which needed to be outside of target cladding. From my understanding mgdraw.f routine can’t do this kind of scoring it can just score at the boundary-crossing, am I correct?

Sorry for my circuitous question. Do I have to back on work with fluscw.f routine following the research paper (attached below) by using USRBIN/USRTRACK card so I can select “VOID” region?

expected neutron position

 ![spallation target](https://fluka-forum.web.cern.ch/uploads/default/original/2X/d/d6b8cca302992de0adde85e805de4f7eabd4dd4b.jpeg)

research paper that I have followed  
 ![research paper](https://fluka-forum.web.cern.ch/uploads/default/original/2X/4/4b82e9ead32ab3bf42d9504875eab898fe2114dc.png)

mgdraw.f  
[mgdraw.f](https://fluka-forum.web.cern.ch/uploads/short-url/l7Av0i1PZYEgy9htjVyalPuyphF.f) (5.2 KB)

mgdraw output TXT file  
[ads\_mgdraw001\_data.txt](https://fluka-forum.web.cern.ch/uploads/short-url/hdK3xKGaaP6FOQQNx6UabSpKkoh.txt) (2.3 MB)

---

_[View the full topic](https://fluka-forum.web.cern.ch/t/is-usryield-sufficient-for-getting-all-neutron-properties/1202)._
