# Physics card used accelerator dosimetry and shielding

**URL:** <https://fluka-forum.web.cern.ch/t/physics-card-used-accelerator-dosimetry-and-shielding/5067>\
**Category:** Physics, Transport and Magnetic Fields\
**Created:** [24 August 2023 21:38 UTC](https://fluka-forum.web.cern.ch/t/physics-card-used-accelerator-dosimetry-and-shielding/5067 "2023-08-24T21:38:57Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rajarshi](https://fluka-forum.web.cern.ch/letter_avatar_proxy/v4/letter/r/77aa72/32.png) [@Rajarshi](https://fluka-forum.web.cern.ch/u/Rajarshi)\
**Post date:** [24 August 2023 21:38 UTC](https://fluka-forum.web.cern.ch/t/physics-card-used-accelerator-dosimetry-and-shielding/5067/1 "2023-08-24T21:38:57Z")

</div>

Hi everyone, a new user of Fluka here. I am trying to simulate a very basic problem with computing dose and diff flux at a certain location from the shielding in a simplistic accelerator geometry. The incident particle beam is say 250 MeV/u Ca-40. It is being fragmented by target and there is shielding of concrete/steel around. I am trying to compute dose and neutron/photon fluence at a certain distance from the shielding and trying to benchmark my results with PHITS.

My question was what PHYSICS cards should be useful here? I know it sounds a very generic question. I am using IONTRANS and DELTARAY cards to begin with. What should be the other cards that might be important for this application? Is the EMF card analogous to the EGS5 in PHITS? I am using ‘HADRONTHERAPY’ as default in this case. Any other cards that might be important for heavy ion transport and computation of neutron/photon flux and total dose?

---

<div class="post-metadata">

**Author:** ![dbozzato](https://fluka-forum.web.cern.ch/letter_avatar_proxy/v4/letter/d/bc79bd/32.png) [@dbozzato](https://fluka-forum.web.cern.ch/u/dbozzato)\
**Post date:** [25 August 2023 08:02 UTC](https://fluka-forum.web.cern.ch/t/physics-card-used-accelerator-dosimetry-and-shielding/5067/3 "2023-08-25T08:02:54Z")

</div>

Dear @Rajarshi,

thank you for your question and welcome to the Forum.  
From the general description of your needs, I suggest you use the `PRECISIO` defaults, not the `HADROTHErapy` one. Since your source particles will be `HEAVYION` (and you will specify the A and Z of the projectile via the `HI-PORPE` card) there is no need for the `IONTRANS`.  
There shouldn’t be a need for the `DELTARAY` card: you can consult the default values on the [FLUKA manual](https://flukafiles.web.cern.ch/manual/chapters/description_input/description_options/deltaray.html#deltaray).

Concerning the `PHYSICS` settings you may want to switch on coalescence and evaporation if residual nuclei and spectra of light fragments are of interest (see the lecture at the FLUKA course on [hadronic interactions](https://indico.cern.ch/event/1123370/contributions/4716053/attachments/2446950/4192987/14_Hadronic_interactions_2022_ULB.pdf)).

The `EMF` card switches on or off the electron, positron, and photon transport in FLUKA: by default their transport is active. Having `EMF` off corresponds to the PHITS parameter `negs=0`. The thresholds for production and transport of electrons, positrons and photons are controlled by the `EMFCUT` card (see for example the lecture at the FLUKA course on [EM thresholds](https://indico.cern.ch/event/1123370/contributions/4716026/attachments/2446124/4191569/09_EM_transport_thresholds_2022_ULB.pdf)): this card is somewhat equivalent to the parameters `emin(12)`, `emin(13)`. and `emin(14)` of PHITS. Pay attention that the default energy unit in FLUKA is GeV not MeV and the default values of the thresholds for photons are not the same.

Best regards,  
Davide

---

<div class="post-metadata">

**Author:** ![Rajarshi](https://fluka-forum.web.cern.ch/letter_avatar_proxy/v4/letter/r/77aa72/32.png) [@Rajarshi](https://fluka-forum.web.cern.ch/u/Rajarshi)\
**Post date:** [25 August 2023 14:26 UTC](https://fluka-forum.web.cern.ch/t/physics-card-used-accelerator-dosimetry-and-shielding/5067/4 "2023-08-25T14:26:40Z")

</div>

Thank you Davide for the detailed response. Much appreciated.

---

<div class="post-metadata">

**Author:** ![rversaci](https://fluka-forum.web.cern.ch/letter_avatar_proxy/v4/letter/r/cc9497/32.png) [@rversaci](https://fluka-forum.web.cern.ch/u/rversaci)\
**Post date:** [29 August 2023 07:59 UTC](https://fluka-forum.web.cern.ch/t/physics-card-used-accelerator-dosimetry-and-shielding/5067/5 "2023-08-29T07:59:37Z")

</div>


