# Radiative processes included when using the PAIRBREM card

**URL:** <https://fluka-forum.web.cern.ch/t/radiative-processes-included-when-using-the-pairbrem-card/7300>\
**Category:** Physics, Transport and Magnetic Fields\
**Created:** [20 April 2025 14:41 UTC](https://fluka-forum.web.cern.ch/t/radiative-processes-included-when-using-the-pairbrem-card/7300 "2025-04-20T14:41:11Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![szpigel](https://fluka-forum.web.cern.ch/letter_avatar_proxy/v4/letter/s/ccd318/32.png) [@szpigel](https://fluka-forum.web.cern.ch/u/szpigel)\
**Post date:** [20 April 2025 14:41 UTC](https://fluka-forum.web.cern.ch/t/radiative-processes-included-when-using-the-pairbrem-card/7300/1 "2025-04-20T14:41:11Z")

</div>

Dear experts,

I am running a simulation using the PAIRBREM card to obtain a spectrum of X-rays produced by bremsstrahlung of primary protons injected into a thick-target (see post [Proton bremsstrahlung](https://fluka-forum.web.cern.ch/t/proton-bremsstrahlung/7130)).

Continuous emission of X-rays can be produced in proton–atom collisions by nuclear bremsstrahlung (NB), atomic bremsstrahlung (AB), secondary-electron bremsstrahlung (SEB), and quasi-free-electron bremsstrahlung (QFEB). Which of these radiative processes are included in FLUKA?

Thank you in advance,

Sergio

---

<div class="post-metadata">

**Author:** ![cesc](https://fluka-forum.web.cern.ch/letter_avatar_proxy/v4/letter/c/5f8ce5/32.png) [@cesc](https://fluka-forum.web.cern.ch/u/cesc)\
**Post date:** [23 April 2025 14:00 UTC](https://fluka-forum.web.cern.ch/t/radiative-processes-included-when-using-the-pairbrem-card/7300/3 "2025-04-23T14:00:30Z")

</div>

Dear Sergio,

Thanks for your question.

Concerning Bremsstrahlung by muon and charged-hadron projectiles (p), in FLUKA you’ll get a photon energy spectrum following

\frac{\text{d}\sigma}{\text{d}\nu} \sim \frac{1}{\nu}\left[1 - \nu + \frac{3}{4} \nu^2\right],\qquad \nu = \frac{E\_\gamma}{E\_p},

where E\_\gamma and E\_p are the energies of the emitted photon and the kinetic energy of the projectile, respectively.

That should essentially correspond to _Nuclear Bremsstrahlung_ in the list above, with a complementary screening/polarization term applied to it. Needless to say, if a delta ray (secondary electron) is produced in another interaction, it too will emit Bremsstrahlung (depending on `EMFCUT` settings) as per the postscript below.

It’s worth pointing out that muons and charged-hadron projectiles (p) of less than

E\_\text{min}=m\_pc^2\sqrt{\frac{2000}{Z\_t}}\ \text{ GeV},

in a material with atomic number Z\_t will not emit Bremsstrahlung in FLUKA in view of its low likelihood compared to _e.g._ ionization or even nuclear reaction processes. For protons in H, Al, and U, E\_\textrm{min} is about 41.9 GeV, 11.16 GeV, and 4.4 GeV, respectively.

Cheers,

Cesc

PS: for electron (and positrons) FLUKA will give you electron-nucleus and electron-electron Bremsstrahlung.

---

<div class="post-metadata">

**Author:** ![szpigel](https://fluka-forum.web.cern.ch/letter_avatar_proxy/v4/letter/s/ccd318/32.png) [@szpigel](https://fluka-forum.web.cern.ch/u/szpigel)\
**Post date:** [23 April 2025 15:36 UTC](https://fluka-forum.web.cern.ch/t/radiative-processes-included-when-using-the-pairbrem-card/7300/4 "2025-04-23T15:36:53Z")

</div>

Dear Cesc,

Thank you very much for your reply. It helped to better understand why I am only getting a few photons in my proton bremsstrahlung simulations, complementing the reply I got from Andreas Waets to my previous post ([Proton bremsstrahlung - #6 by anwaets](https://fluka-forum.web.cern.ch/t/proton-bremsstrahlung/7130/6)).

Cheers,

Sergio

---

<div class="post-metadata">

**Author:** ![horvathd](https://fluka-forum.web.cern.ch/user_avatar/fluka-forum.web.cern.ch/horvathd/32/10584_2.png) [@horvathd](https://fluka-forum.web.cern.ch/u/horvathd)\
**Post date:** [7 May 2025 06:35 UTC](https://fluka-forum.web.cern.ch/t/radiative-processes-included-when-using-the-pairbrem-card/7300/5 "2025-05-07T06:35:52Z")

</div>


